RESISTANT TO FREEZING A1208 ULTRASONIC THICKNESS METER

Frost resistant ultrasonic thickness measuring device, in difficult weather conditions (-30 - +50 ° C) can measure.

Thickness measurement range of steel from 0.8 to 300 mm.

The device can be used with both double and single crystal crystal transducers.

Single-crystalline corrosion resistant metals with S3567 2.5A0D10CL transducer, thickness measurement can be made in cast iron and other materials.

Double crystal transducer can be used for small-scale D2763 10.0A0D6CL pitting corrosion and thickness measurement in pipes with a thin wall thickness.

Large, high-contrast display with easy-to-use interface and serial measurements.

PROPERTIES

• Shock resistant plastic housing
• Large TFT information display
• LiIon battery
• Transducer automatic adaptation
• thickness measurements at various sensitivity (0.1 / 0.01 mm)
• Various modes of operation
• Display of the thickness of the test piece as%
• Thickness of the known part of the ultrasonic velocity calibration
• permanent memory of 50 000 ölçümlük
• USB connector for PC data transmission 

EXTRA FUNCTIONS

• Audible indication
• Vibrating indicator
• Signal level indicator
• Battery level indicator
• Automatic shut-off

OPERATING MODES

NORM Mode

Used for quick thickness measurement, automatic fault alarm can be set to operate within the range detectable and can reduce the metal thickness

Warns not to sound and vibration results within the limits and depth chart shows the value of the scale.

 Memory Mode

1.    Results in fast thickness measurement mode can be saved to permanent memory. When saving results can be     
2.  comfortable and be able to see better and to interpret grouping.

   PROPERTIES

PROPERTIES