| Category |
Description |
| Fiber alignment |
Fixed V-Groove(Clad to Clad)
|
| Applicable type of fibers |
SM(ITU-T G.652), MM(ITU-T G.651), DS(ITU-T G.653), NZDS(ITU-T G.655)
|
| Fiber count |
Single fiber, 2~12 fiber
|
| Applicable fiber dimensions |
Single: Cladding diameter 125㎛, Coating diameter 250, 900㎛ Ribbon: Cladding diameter 125㎛, Ribbon fiber thickness 0.25 to 0.40mm
|
| Fiber setting and cleaved length |
10mm
|
| Splicing modes |
Splice mode: 100, Heat mode: 100
|
| Typical Splice Loss |
SM: 0.05dB, MM: 0.02dB, DS: 0.08dB, NZDS: 0.08dB
|
| Return Loss |
> 60dB
|
| Splicing Time |
Typical 16sec with SM(ITU-T G.652)
|
| Splice loss estimate |
Available
|
| Sleeve heating time |
1~2 core 20sec, 4~12 core 50sec
|
| Applicable protection sleeve |
40mm, 60mm(fiber), Micro
|
| Storage of splice result |
The last 10,000 results to be stored in the internal memory.
(Image 10,000 results)
|
| Tension test |
2N
|
| Operating condition |
Altitude: 0~5,000m above sea level, Temperature: -10℃~50℃, Humidity: 0~95%, Wind: 15m/s, non-condensing, dust proof, water proof, shock proof
|
| Storage condition |
Temperature: -40℃~80℃, Humidity: 0~95%
|
| Dimension |
142(W) ｘ163(L) ｘ146(H)mm(Including rubber)
|
| Weight |
2.0kg(Including battery 2.5kg)
|
| Viewing method and display |
Two CMOS cameras and 4.3-inch color LCD monitor with touch screen
|
| Fiber view and magnification |
20X, MAX 55X
|
| Power supply |
DC Lithium polymer battery(DC 14.8V, 6000mAh), 100~240V AC Adapter
|
| No. of splice cycles with battery |
200cycle
|
| Electrode life |
More than 1,500 times
|
| Terminals |
USB, External Power(DC 12V Available for car cigar jack) DC Output 13.2~16.8V
|
