PRECISION SAMPLE CUTTER
model 2G-15
The development and production of environment friendly papers and boards, with high
performance and low cost, require constant R&D (research and development) and Q.C. (quality control).
The effective preparation of representative test pieces is a key point in paper and board
physical tests that might not be forgotten by users.
The 2G-15 is used to prepare rapidly test pieces with exact dimensions for several major
physical tests for paper and board below listed.
This equipment is manually driven and has a extremely reliable operation due to its rugged
and accurate mechanical construtction.
MAJOR TECHNICAL CHARACTERISTICS
|
Type of Test
|
Size of test piece
|
Tolerances
|
Applicable Standards
|
|
Tensile tests
|
(15, 25, 25,4 or 50 x 300) mm
|
± 0,1 mm
|
ISO1924/2, TAPPI T-494
|
|
RCT - Ring crush tests
|
(12,7 x 152,4) mm (1/2 x 6) in
|
± 0,1 mm
|
ISO 12192, TAPPI T-822
|
|
CMT - Concora Medium Test
|
(12,7 x 152,4) mm (1/2 x 6) in
|
± 0,1 mm
|
ISO 7263, TAPPI T-809
|
|
CCT - Corrugated Crush Test
|
(12,7 x 152,4) mm (1/2 x 6) in
|
± 0,1 mm
|
TAPPI T-824
|
|
Tests of bending resistance
|
(38,1 x 70) mm
|
± 0,1 mm
|
ISO 2493, TAPPI T-489
|
|
Tests of tearing resistance
|
(63 x 70) mm
|
± 0,1 mm
|
ISO 1974, TAPPI T-414
|
Smart safety clamping system prevents slippage of sheet while cutting and also prevents
operator from unintentionally leaving his fingers or hand in the dangerous punching area.
The 2G-15 also features iron-cast frame, die and punch made of tempered alloy steel,
holes for fastening the cutter to a bench, feeding table, storing table for cut test pieces,
long handle for light and ergonomic operation
무단수집및 복재를 금합니다 .
상품정보고시
| 제품명 |
SAMPLE CUTTER model, 2G-15 |
| 판매가격 |
가격문의 |
| 원산지 |
|
